This is a GM Tech 2 user successful case of setup Tech 2 tis2000 software on Windows XP. Put here for sharing.JUST FOR SHARING.BIG THANKS to MoosemanSo you have a but a lot of the things you would like to do is locked out because you don’t have access to the computer software to allow you to do it. Things like updating PCM’s and modules and anything security related are locked out. If you bought one of the Tech2 clones, it probably came with a CD with the Tis2000 software.
Saab Tis 2000 With Crack
If you install it and try to use it, it says that it can’t find the USB security dongle or something like that. That’s because only dealers have those or a clone of one wasn’t included.First of all, this is old software. It was discontinued in 2008 by GM which means that it works only for vehicles up to model year 2007. It will have PCM and module updates included. For example, I was able to update all of the modules and PCM in my 2006 9-7x even though it had only been a year or two since production and issue of this software. It will also allow you to reprogram a module that you are replacing.The Tech2 scanner communicates with the computer using a serial port on the computer running Windows XP SP3. This can be a problem if you only have newer computers.
Best and easiest scenario is to use an older laptop computer that has a serial port running windows XP. In my setup, I used an old IBM T40 laptop, which is fairly decent processor wise, installed a fresh copy of Windows XP SP3 and used a docking station with it that has a serial port. Laptops that have actual serial ports built in are probably so old that they are too slow or have age and reliability issues. Another solution would be to get a USB to serial port adapter and specify the proper COM port number during the install of Tis2000.Another possible solution would be to use a virtual environment on a host computer. VMWare is free to use and it has been done from what I read but could be a fairly involved process because of the serial port issue, especially when using a USB to serial adapter. The challenge of communicating from the virtual environment through the real computer’s hardware ports can make it difficult but can be done. I’m not going to discuss this type of installation but the basic software installation and use will be the same.
If anyone gets a virtual install working, please post it up.In some detail, this is what I did. Keep in mind that you should have some computer knowledge and know how to install Windows.1.
Tis 2000 Saab
Installed a fresh copy of Windows XP SP3. I didn’t bother with updating anything else as far as security updates to Windows or install a virus scan because this computer will never be connected to the Internet or used for anything else.2. Installed ALL the required drivers until there were no more yellow check marks in Device Manager. I failed to do this at first and caused a lot of headaches later, including a BSOD during software installation.3. If you’re using a USB to serial adapter, plug it in now and set it up. Go into Device Manager and make note of the COM port used by the adapter.3.
Saab Tis2000 Dongle Crack
Install the Tis2000 software from the CD included with the Tech2. During the install, it will ask you to specify the COM port. If you have a serial port on the computer, it’s probably COM 1 or use the one from the USB adapter.4. Before you can use TIS2000 with your Tech2, you have to make it “think” that there is a dongle connected that authorizes it.
You can download the crack below. Follow the read me file for instructions on how to use it.That’s it. More threads will come explaining how to do stuff with it but this will get you going.And if you need them:Maybe there are some free links to download, but i’m not sure of its functionality and security. Good luck if download files online.Warning: In Tis2000, whatever you do, DO NOT USE THE “SOFTWARE DOWNLOAD” BUTTON! This will retrograde the card in your Tech2 to an old version from 2008.
Share. LinkedIn. Facebook. Twitter0Here is a customer solution of GM Tech 2 software Globaltis & TIS 2000 Security access issues.Puzzles:I’m getting my butt kicked; I have a with Saab v148.o card in it. I have tried from Globaltis(Cracked) and TIS 2000 (Hardware key) but cannot gain security access.gives me the error “cannot connect with security server”Globaltis just says “error” when trying to gain security access.I know it is communicating with the tech ii, because during the security check the tech goes from the home screen to “downloading”.I am using a laptop with a TRENDnet TU-S9 USB to Serial Converter running XP SP3. I have java version 6 update 12 running.The only think I’ve noticed is the when starting globaltis it states “SAAB Automobile AB v146.00”. I have the 148 SAAB PCIAM card, do not know if that could be affecting it or not.Customer solution:Is your communicate with your car using PCMCIA SAAB v148.000?Very important.Here in the forum two types of SAAB v148.000 PCMCIA was sharedOne for Tech2 hand held and one cracked for Tech2 WinIn Tech2 hand he'll only the one for its workingIf its the right card uploaded in your tool card then go Security and do itTry Java v 6.26Its the best for GlobalTis or Java v7.0Tis2000 I have it installed but never used.
I usually use GlobalTisGood luck!